zypper dup for 20180114 stalls on kernel-devel and kernel-source

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

zypper dup for 20180114 stalls on kernel-devel and kernel-source

Freek de Kruijf
When doing zypper dup for this snapshot zypper hangs in checking for
conflicts. Only after locking kernel-devel and kernel-source zypper finishes
with the other packages.

--
fr.gr.

member openSUSE
Freek de Kruijf



--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

İsmail Dönmez-2
On 16 Jan 15:30, Freek de Kruijf wrote:
> When doing zypper dup for this snapshot zypper hangs in checking for
> conflicts. Only after locking kernel-devel and kernel-source zypper finishes
> with the other packages.

Did you let it run? Because it's just really really slow.

Regards,
ismail

--
SUSE Linux GmbH, GF:  Felix Imendörffer,  Jane Smithard,  Graham Norton,
HRB 21284 (AG Nürnberg)  

signature.asc (849 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Knurpht-openSUSE
In reply to this post by Freek de Kruijf
Op dinsdag 16 januari 2018 15:30:56 CET schreef Freek de Kruijf:
> When doing zypper dup for this snapshot zypper hangs in checking for
> conflicts. Only after locking kernel-devel and kernel-source zypper finishes
> with the other packages.
It doesn't hang. Patience is a virtue :-).

--
Gertjan Lettink, a.k.a. Knurpht

openSUSE Board Member
openSUSE Forums Team


--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Dominique Leuenberger / DimStar
In reply to this post by Freek de Kruijf
On Tue, 2018-01-16 at 15:30 +0100, Freek de Kruijf wrote:
> When doing zypper dup for this snapshot zypper hangs in checking for
> conflicts. Only after locking kernel-devel and kernel-source zypper finishes
> with the other packages.

https://bugzilla.opensuse.org/show_bug.cgi?id=953130 ?

Cheers
Dominique

signature.asc (201 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Freek de Kruijf
In reply to this post by İsmail Dönmez-2
Op dinsdag 16 januari 2018 15:39:07 CET schreef İsmail Dönmez:
> On 16 Jan 15:30, Freek de Kruijf wrote:
> > When doing zypper dup for this snapshot zypper hangs in checking for
> > conflicts. Only after locking kernel-devel and kernel-source zypper
> > finishes with the other packages.
>
> Did you let it run? Because it's just really really slow.
>
> Regards,
> ismail

I did for several minutes. After a reboot and removing the locks I am trying
again. Only these two are left to be upgraded. Running for 5 minutes now;
still at 53 % (no progress, except for -/|\). Will wait one hour.

--
fr.gr.

member openSUSE
Freek de Kruijf



--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Freek de Kruijf
In reply to this post by Knurpht-openSUSE
Op dinsdag 16 januari 2018 15:42:05 CET schreef Knurpht - Gertjan Lettink:
> Op dinsdag 16 januari 2018 15:30:56 CET schreef Freek de Kruijf:
> > When doing zypper dup for this snapshot zypper hangs in checking for
> > conflicts. Only after locking kernel-devel and kernel-source zypper
> > finishes with the other packages.
>
> It doesn't hang. Patience is a virtue :-).

Might be true, but there must be a bug somewhere. I solved it by "zypper rm"
all kernel-devel and kernel-source packages, which went like a charm, "zypper
clean", to remove already downloaded packages, and "zypper in kernel-devel
kernel-source", to install. It all was done in just a few minute, if not one
minute.

--
fr.gr.

member openSUSE
Freek de Kruijf



--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Jogchum Reitsma
In reply to this post by İsmail Dönmez-2
Op 16-01-18 om 15:39 schreef İsmail Dönmez:
> On 16 Jan 15:30, Freek de Kruijf wrote:
>> When doing zypper dup for this snapshot zypper hangs in checking for
>> conflicts. Only after locking kernel-devel and kernel-source zypper finishes
>> with the other packages.
> Did you let it run? Because it's just really really slow.
>
> Regards,
> ismail
>
It can take several hours, is my experience.

regards, Jogchum

--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Werner Flamme
In reply to this post by Freek de Kruijf
Freek de Kruijf [16.01.2018 16:15]:

> Op dinsdag 16 januari 2018 15:42:05 CET schreef Knurpht - Gertjan Lettink:
>> Op dinsdag 16 januari 2018 15:30:56 CET schreef Freek de Kruijf:
>>> When doing zypper dup for this snapshot zypper hangs in checking for
>>> conflicts. Only after locking kernel-devel and kernel-source zypper
>>> finishes with the other packages.
>>
>> It doesn't hang. Patience is a virtue :-).
>
> Might be true, but there must be a bug somewhere. I solved it by "zypper rm"
> all kernel-devel and kernel-source packages, which went like a charm, "zypper
> clean", to remove already downloaded packages, and "zypper in kernel-devel
> kernel-source", to install. It all was done in just a few minute, if not one
> minute.
>
If kernel-source is participating here, the "check for file conflicts"
may be the part of the routine that causes the delay. When there are too
many kernel-sources installed, this check takes really long.

Werner

--



smime.p7s (7K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: zypper dup for 20180114 stalls on kernel-devel and kernel-source

Ken Schneider - openSUSE
In reply to this post by Freek de Kruijf
On 01/16/2018 09:53 AM, Freek de Kruijf wrote:

> Op dinsdag 16 januari 2018 15:39:07 CET schreef İsmail Dönmez:
>> On 16 Jan 15:30, Freek de Kruijf wrote:
>>> When doing zypper dup for this snapshot zypper hangs in checking for
>>> conflicts. Only after locking kernel-devel and kernel-source zypper
>>> finishes with the other packages.
>>
>> Did you let it run? Because it's just really really slow.
>>
>> Regards,
>> ismail
>
> I did for several minutes. After a reboot and removing the locks I am trying
> again. Only these two are left to be upgraded. Running for 5 minutes now;
> still at 53 % (no progress, except for -/|\). Will wait one hour.
>

"kernel-source" is the culprit. If you are not building your own kernel
it's not needed. You need to just let it run, 15-30 minutes is not an
unreasonable amount of time with kernel-source installed.

--
Ken Schneider

--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]