clisp package missing on 12.3 ppc

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

clisp package missing on 12.3 ppc

Rüdiger Meier
Hi,

the clisp package is not built for 12.3 on ppc arch. Does anybody know
why it's missing?
It exists for 12.2 and Factory ppc.

cu,
Rudi
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Marcus Meissner
On Wed, Apr 03, 2013 at 04:52:34PM +0200, Ruediger Meier wrote:
> Hi,
>
> the clisp package is not built for 12.3 on ppc arch. Does anybody know
> why it's missing?
> It exists for 12.2 and Factory ppc.

It did not build and we did not fix it in time for 12.3.

osc rbl openSUSE:12.3 clisp ports ppc

hmm,
[ 1118s]  35                    socket:    1 error out of       89 tests

which comes from here I think:
[ 1063s] (LISTP (SHOW (LIST (MULTIPLE-VALUE-LIST (SOCKET-STREAM-LOCAL *SOCKET-1*)) (MULTIPLE-VALUE-LIST (SOCKET-STREAM-PEER *SOCKET-1*)) (MULTIPLE-VALUE-LIST (SOCKET-STREAM-LOCAL *SOCKET-2*
)) (MULTIPLE-VALUE-LIST (SOCKET-STREAM-PEER *SOCKET-2*))) :PRETTY T))
[ 1063s] [SIMPLE-CHARSET-TYPE-ERROR]: SOCKET-STREAM-LOCAL: Invalid byte sequence #xEB #x1E #xA0 in CHARSET:UTF-8 conversion
[ 1063s]
[ 1063s] ERROR!! ERROR should be T !


The error is still there in factory.

Your PowerPC fixing help is welcome. :)

Ciao, Marcus
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Andreas Schwab-2
In reply to this post by Rüdiger Meier
Ruediger Meier <[hidden email]> writes:

> the clisp package is not built for 12.3 on ppc arch. Does anybody know
> why it's missing?

It failed to build on 12.3.

> It exists for 12.2 and Factory ppc.

Factory:PowerPC contains an older build, the latest version didn't build
either.

Andreas.

--
Andreas Schwab, SUSE Labs, [hidden email]
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE  1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Rüdiger Meier
In reply to this post by Marcus Meissner
On Wednesday 03 April 2013, Marcus Meissner wrote:
> On Wed, Apr 03, 2013 at 04:52:34PM +0200, Ruediger Meier wrote:
> > Hi,
> >
> > the clisp package is not built for 12.3 on ppc arch. Does anybody
> > know why it's missing?
> > It exists for 12.2 and Factory ppc.
>
> It did not build and we did not fix it in time for 12.3.

Hm, it's not really helpful that most devel projects do not build
against the non-x86 ports. So most packagers will not notice when
something breaks which was working before.

> osc rbl openSUSE:12.3 clisp ports ppc
> [...]
> The error is still there in factory.
> Your PowerPC fixing help is welcome. :)

Is there a way to get the package revision and/or the build log of the
last successful build?


cu,
Rudi
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Dinar Valeev
Fixed with created request id 162509

On Wed, Apr 3, 2013 at 7:17 PM, Ruediger Meier <[hidden email]> wrote:

> On Wednesday 03 April 2013, Marcus Meissner wrote:
>> On Wed, Apr 03, 2013 at 04:52:34PM +0200, Ruediger Meier wrote:
>> > Hi,
>> >
>> > the clisp package is not built for 12.3 on ppc arch. Does anybody
>> > know why it's missing?
>> > It exists for 12.2 and Factory ppc.
>>
>> It did not build and we did not fix it in time for 12.3.
>
> Hm, it's not really helpful that most devel projects do not build
> against the non-x86 ports. So most packagers will not notice when
> something breaks which was working before.
>
>> osc rbl openSUSE:12.3 clisp ports ppc
>> [...]
>> The error is still there in factory.
>> Your PowerPC fixing help is welcome. :)
>
> Is there a way to get the package revision and/or the build log of the
> last successful build?
>
>
> cu,
> Rudi
> --
> To unsubscribe, e-mail: [hidden email]
> To contact the owner, e-mail: [hidden email]
>
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Marcus Meissner
In reply to this post by Rüdiger Meier
On Wed, Apr 03, 2013 at 07:17:35PM +0200, Ruediger Meier wrote:

> On Wednesday 03 April 2013, Marcus Meissner wrote:
> > On Wed, Apr 03, 2013 at 04:52:34PM +0200, Ruediger Meier wrote:
> > > Hi,
> > >
> > > the clisp package is not built for 12.3 on ppc arch. Does anybody
> > > know why it's missing?
> > > It exists for 12.2 and Factory ppc.
> >
> > It did not build and we did not fix it in time for 12.3.
>
> Hm, it's not really helpful that most devel projects do not build
> against the non-x86 ports. So most packagers will not notice when
> something breaks which was working before.

"most" ... I had adjusted at least the ones where I have write permissions
which covers quite a bit...

We also have now the build power to do so actually, we did not have it
before ;)
 
> > osc rbl openSUSE:12.3 clisp ports ppc
> > [...]
> > The error is still there in factory.
> > Your PowerPC fixing help is welcome. :)
>
> Is there a way to get the package revision and/or the build log of the
> last successful build?

osc rbl openSUSE:12.2:PowerPC clisp standard ppc

is the one for 12.2.

Ciao, Marcus
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Rüdiger Meier
On Wednesday 03 April 2013, Marcus Meissner wrote:
> On Wed, Apr 03, 2013 at 07:17:35PM +0200, Ruediger Meier wrote:

> > Is there a way to get the package revision and/or the build log of
> > the last successful build?
>
> osc rbl openSUSE:12.2:PowerPC clisp standard ppc

What I really miss is a history of all builds.
Having the build log of the last successful and first failing build
could be really useful sometimes. Also sometimes I'd like to compare
build logs between particulare package revisions just to review the
effect of a past change.

cu,
Rudi
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Rüdiger Meier
In reply to this post by Dinar Valeev
On Wednesday 03 April 2013, Dinar Valeev wrote:
> Fixed with created request id 162509

Would it be possible to get this into 12.3?

cu,
Rudi
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Dinar Valeev
On Wed, Apr 3, 2013 at 11:37 PM, Ruediger Meier <[hidden email]> wrote:
> On Wednesday 03 April 2013, Dinar Valeev wrote:
>> Fixed with created request id 162509
>
> Would it be possible to get this into 12.3?
I think we could build it in Ports
>
> cu,
> Rudi
> --
> To unsubscribe, e-mail: [hidden email]
> To contact the owner, e-mail: [hidden email]
>
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: clisp package missing on 12.3 ppc

Marcus Meissner
In reply to this post by Rüdiger Meier
On Wed, Apr 03, 2013 at 11:37:29PM +0200, Ruediger Meier wrote:
> On Wednesday 03 April 2013, Dinar Valeev wrote:
> > Fixed with created request id 162509
>
> Would it be possible to get this into 12.3?

Somone can create a maintenance update.

(powerpc gets online updates for 12.3)

Ciao, Marcus
--
To unsubscribe, e-mail: [hidden email]
To contact the owner, e-mail: [hidden email]